How Much Does Repointing & Tuckpointing Cost in Perth? 2026

Repointing is one of the major maintenance tasks for Perth homes. Mortar deteriorates over time due to the sun, rain and the coastal salt air. When it does, air pockets open up, and water can come inside the walls. Getting the mortar repaired early will protect your home and save you expensive structural repairs in the future. But how much does brick repointing cost? Prices differ depending on area, access and type of mortar. Homeowners can confidently plan for repairs when they have a grasp of local Perth pricing. Here’s a quick summary of normal repointing prices in 2026:

• Per linear metre: $6 – $30
• Per square metre: $50 – $100
• Small section (5–10m²): $400 – $1,000
• Single wall (30m²): $1,500 – $3,000
• Entire house: $5,000 – $15,000
• Labour rate: $48 – $100 per hour (Perth average)

In this guide, we’re going to go over Perth repointing bricks costs, when you might need to get it done and what costs can come into play.

What Is Repointing & When Do You Need It?

Repointing is when you remove defective mortar between bricks and replace it with new mortar. Mortar is softer than brick and intended to absorb movement and weathering. It eventually starts to crack, crumble and weaken from years of exposure. Repointing reseals bricks and enhances aesthetics and strength.

Signs You Need Repointing

• Crumbling or missing mortar
• Gaps between bricks and mortar
• Mortar easily crumbles when touched
• Water stains or dampness on interior walls
• Cracks wider than 5mm
• White salt deposits (efflorescence)

Can’t figure out whether you need brick repointing Perth? Get a free consultation from Boda Building Group now. 

Why It Matters in Perth

The climate in Perth is hard on brick. Hot summers are followed by harsh winters. Additionally, homes closer to the ocean are exposed to more salt. These conditions speed up mortar deterioration in the following ways:

• UV damage from intense sun
• Thermal expansion and contraction
• Winter rainfall penetration
• Sea salt air in the West Coast suburbs

Typical Timeline

In mild climates, mortar can survive for 20–30 years. Perth conditions commonly retard this to 15–25 years. Older homes with soft mortar might require earlier attention.

Repointing vs. Tuckpointing

Repointing introduces new mortar to match the previous shade. Tuckpointing replaces the mortar and adds a contrasting decorative line, so it costs more.

Feature	Repointing	Tuckpointing
Purpose	Structural repair	Decorative and structural
Mortar colour	Matches existing	Contrasting line added
Cost	Standard	Tuckpointing cost is higher than repointing
Skill level	General bricklayer	Specialist finisher

Perth Repointing Cost Breakdown

This section offers a detailed breakdown of how brick repointing costs are calculated in Perth and what homeowners can expect to pay for different project types.

Pricing Methods

The different pricing methods are as follows. Contractors in Perth usually choose the method based on the size of the job and the part of the property being repaired.

Per Linear Metre

This method is used when the work runs in a straight line, such as along a brick fence or a single narrow wall. It is a simple way to price jobs where height and depth remain consistent.

• Basic mortar or brick pointing cost: $6 – $30 per linear metre
• Complex or heritage work: $30 – $50+ per metre
• Average 20m brick fence: $160 – $500

For tuckpointing, the costs will begin at $200–$400 per linear metre. 

Per Square Metre

Larger surfaces, such as full house walls, are normally priced per square metre. The repointing cost per square metre approach reflects the total area that needs grinding, cleaning, and refilling.

• Standard cement mortar: $50 – $70 per m²
• Lime mortar for heritage: $60 – $100 per m²
• Includes labour and materials

For tuckpointing, the costs are as follows:

• Standard mortar: $50+ per square metre
• Specialised lime mortar: $60 to $100 per square metre

Hourly Labour Rates – small repairs

For minor patches or quick maintenance jobs, bricklayers often charge by the hour instead of by the area. This is common when only a few damaged sections need attention.

• Perth bricklayers: $48 – $100 per hour
• Minimum call-out: 2–4 hours ($200 – $350)

For tuckpointing, the charges are between $50 and $100 per hour for labour.

Want to hire the best bricklaying contractors Perth? Schedule a meeting with us now. 

Cost by Project Size

Repointing costs increase with the overall area and complexity of the project. The table below shows typical Perth tuckpointing and repointing price per metre for different job sizes, from small patches to full house exteriors.

Project Size	Area	Total Cost of Repointing	Total Cost of Tuckpointing
Small patch	5 m²	$400 – $700	$1,000 – $2,000
Single wall	30 m²	$1,500 – $3,000	$6,000 – $12,000
Large wall	50 m²	$2,500 – $5,000	$10,000 – $20,000
Entire house exterior	150–200 m²	$7,500 – $20,000	$30,000 – $80,000
Chimney repointing	6–12 m²	$500 – $1,500	$1,200 – $4,800

 

Material Costs in Perth

Prices differ across materials, depending on strength, finish and whether there is any need for colour matching. Historic properties frequently require lime-based products, which tend to cost more than ordinary cement mixes.

Material Type	Cost Per Bag	Coverage	Best Used For
Cement mortar	$25 – $40	3–5m²	Modern homes
Lime mortar	$35 – $60	3–5m²	Heritage buildings
Colour-matched mortar	+$15 – $30	3–5m²	Visible feature walls

Disclaimer: The prices provided in this guide are just an estimate from the average cost for market rates in Perth 2026. Figures are for guidance only and shouldn’t be taken as exact quotations.

Real Perth Example

30m² wall repointing in Mount Lawley

• Repointing mortar with standard cement
• Materials: $300
• Labour: 3 days at $520 per day: $1,560
• Total: $1,860 or about $62 per m²

What Affects Repointing Costs in Perth?

Repointing quotes vary based on several factors. The walls’ condition, location and access all play into how much the final price will be.

1. Wall Height & Access

• Ground level repointing brickwork cost: Base rate
• First floor: 20–30% extra due to scaffolding
• Repointing roof cost: 40–50% extra
• Scaffolding hire: $600 – $1,500 per week

2. Extent of Damage

• Minor deterioration: Lower mortar repair Perth cost and faster work
• Severe damage: May require brick replacement
• Structural issues: Engineer assessment required

Are you in need of brick restoration services in Perth? Get in touch with our experts. 

3. Mortar Type

• Modern cement: $50 – $70 per m²
• Lime mortar for heritage: $60 – $100 per m²
• Colour matching: $100 – $300 for lab testing

4. Property Type

• Standard residential repointing brick cost: Base rate
• Heritage or character homes: 30–50% extra
• Landmark properties: May require council approval

5. Perth Location

• Inner Perth, such as Subiaco and Mount Lawley: $55 – $65 per hour
• Northern suburbs such as Joondalup: $48 – $58 per hour
• Southern suburbs such as Baldivis: $48 – $55 per hour
• Hills, including Kalamunda: about 10% extra for travel

6. Site Accessibility

• Easy access: base rate
• Narrow side passages: 15–20% extra
• Obstructed areas: 20–30% extra

Whether you need boundary walls repairs or roof repointing, the experts at Boda Building Group are here for you. Call us now to get free estimates. 

Conclusion

Repointing can be a great way to ensure Perth homes remain unaffected by moisture, salt air and other long-term damage. Prices depend on size, access and type of mortar. It is always less expensive to fix things early than it is to do major repairs later. A professional local estimation allows you to budget with confidence. When it comes to quality workmanship, you can trust Boda Building Group to be the brick repointing specialists in Perth. We offer expert mortar matching and extensive experience with historic buildings. Our team has more than 15 years of experience in Perth projects. Services are licensed, insured, and supported by free estimates. Call us today!